Motor Cooling Fan Connector - 80/90mm Extra Long - Sinclair C5 3D Printing
For those people with 12V C5's where the motor needs some extra cooling. If you want to mount the connector on a C5 which has the motor temperature sensor attached you will need an extra long connector, here is one. It is the same as the one above, only longer:
More C5 Links
Latest from C5owners.com
Lotus C5 prototype by John Dunne It's a common misconception that Lotus only involvement in the C5 develop was the Y frame chassis, however as detailed in the Lotus World Magazine March 1985 & also in both of Barrie Will books who was the Managing Director of Sinclair Vehicle, Lotus developed, designed & build the C5 prototypes.
posted on: 24/05/2020
Simplified Relay Controls This article by John Wilson shows how to re-wire a C5 with the original 12V motor.
posted on: 27/04/2016
Control Clerk Training Notes Here are some rare C5 training notes from Hoover desgned for call centre staff and engineers.
posted on: 22/03/2016
Offroad Prototypes by Brian McCool For years there had been rumors about the Off Road C5's. Has anybody seen one?
posted on: 10/03/2016