The final design of this I've made more condensed so the fan doesn't end up too close to the chain. It no longer sits in the 3 holes on the back of the motor, but instead slots into the 2 larger sections on the back like this to improve the airflow:
And mounted to the motor with the fan on it:
For added peace of mind there is a 3mm hole on each connector allowing you to bolt it together when hooked onto the motor. When you do this it is staying put
I also made a longer version of the normal 90mm connector that allows the plastic heat sensor to remain in place:
Drop us a PM if you're interested in any of these, let me know which one you want.
posted on: 02/10/2013 21:27:41