Please note: The forum is now closed to new submissions. All the existing forum topics and posts are still available, however new topics cannot be created. If you need Sinclair C5 advice please use the C5 Owners Facebook Group.

Dan posted:

The LM358 chip in the control box is a frequent source of problems, mainly the dreaded flashing current LED's in the POD. This fix involves removing the 12V supply for the chip and replacing it with 5V which makes the chip more stable. All you need to do is make a cut on the 12V going to the chip and run a wire from the 5V to the chip as shown:
posted on: 17/07/2013 18:58:50

SINCLAIR C5 CHAS posted:

Hi there Dan Just found your 2 posts Inproving the control box and will be doing the mod to some of [color=blue][/color][size=7][/size]my Control boxes thanks....Chas
posted on: 25/09/2013 07:39:40