Please note: The forum is now closed to new submissions. All the existing forum topics and posts are still available, however new topics cannot be created. If you need Sinclair C5 advice please use the C5 Owners Facebook Group.

Charliesgarage posted:

I thought the 18mm belt might have better traction than the 30 yr old stock belt. But, no it's slightly bigger than the old one and slips easier. I only found one reference to tightening the belt. Looking under neath adjustment was not readily visible. Any suggestions are welcome
posted on: 08/11/2015 05:44:50

Ray1 posted:

Simple adjustment, from the rear loosen the nut on the white plastic clamp at the left end of the motor. Rotate the motor body by hand, trial and error until it tightens the belt. Tighten the nut. Good luck. Ray
posted on: 08/11/2015 11:44:17

SINCLAIR C5 CHAS posted:

Just make sure the lip stays in place as you turn the motor Chas
posted on: 08/11/2015 13:28:09