Im very interested in the touch screen system for the C5 which i have the bits at hand for. Im building a C5 from the ground up, starting with just the shell. I have at hand the rear axle and differential from a mobility scooter which just happens to be the same width as the C5 rear axle. A new chassis is being made to accommodate the mods. I intend to use a 12v motor which is approx 960 watts and run this at 18v (this was actually run for quite a while in a mobility scooter under these conditions)

What mods would i have to do to the software/hardware in the touch screen system if anything, would i hit any snags?