Please note: The forum is now closed to new submissions. All the existing forum topics and posts are still available, however new topics cannot be created. If you need Sinclair C5 advice please use the C5 Owners Facebook Group.

Guest posted:

Hi all. Been spending a little more time detailing the metal drive cog gear. got a precise pitch and tooth spec and now skimmed the surface. This is steel so no inner spacer to fit prior to the INA bearing that needs to be pressed inside. Soon the testing stage will begin, got to be an improvement than the aging nylon ones currently around. M
posted on: 15/05/2013 19:41:10

dave posted:

How much r these drive cogs going to cost ? Ad do we get discount on here ?
posted on: 15/05/2013 19:46:14

Dan posted:

That looks like a work of art, I'm definitely interested, keep up the good work!
posted on: 15/05/2013 20:01:27

Guest posted:

How much r these drive cogs going to cost ? Ad do we get discount on here ?
....... Dave, you know you will bud . you and Dan are first in line, rather not say the price yet for general sale.
posted on: 16/05/2013 20:54:27

dave posted:

What free to me and dan ? Have you not done one for motor or are you keeping it a secret bud ?
posted on: 17/05/2013 06:27:35

Doc Holliday posted:

Yes very fine. I'm also definitely interested to get the part(s)
posted on: 17/05/2013 06:55:00

dave posted:

Dan I think they should be free for beta testing
posted on: 17/05/2013 19:57:07

SINCLAIR C5 CHAS posted:

Hi there Marra here is the one that I have had made up .The only problem is that they have 72 teeth instead of 68 ..and you would have to get a belt to fit
posted on: 18/05/2013 08:41:23

dave posted:

Are they ready for testing yet marra I want another bomb medal
posted on: 29/08/2013 23:21:43

dave posted:

thanks for the drive gear + the metal gearbox insert marra putting both on 24 touch
posted on: 02/03/2014 16:13:55